Replica IW328087: The Short Answer
A replica IW328087 is a copy of the IWC Schaffhausen watch that carries reference number IW328087. Sellers price these copies from about $70 for a quartz version to $450 or more for a high-grade automatic with a sapphire crystal and a 904L steel case. The reference number tells you which IWC model you are copying, so match the case size, dial layout, and strap option to the photos IWC publishes.
What Is the IW328087 Reference?
The IW328087 is one of IWC's reference codes. IWC builds a single case in several dial and strap variants, and each variant gets its own number, so IW328087 points to one exact combination.
Before you buy a copy, open the IWC site and note the case diameter, lug width, crystal type, and dial details for that number. Replica makers often reuse one case across a whole family, which means a watch sold as IW328087 may show the wrong dial color or the wrong date window.
Listings mix up references all the time. If a seller shows the same photo for five different numbers, the photo is stock and the watch in the box will not match it.
What Does a Replica IW328087 Cost?
Price tracks three things: the movement, the steel, and the amount of hand finishing. The bands below cover what most sellers offer.
- $60 to $120: quartz or a low-grade automatic, mineral glass, folded or hollow bracelet links, printed dial that fades under a loupe.
- $150 to $250: mid tier. Sapphire crystal, A2824 or DG2813 automatic, solid links, clean date alignment.
- $300 to $500: super clone tier. 904L steel option, anti-reflective sapphire, engraved and decorated movement, closer dial printing and lume.
Anything past $600 for this reference is a markup, not a better watch. Ask what movement and what steel the seller uses before you compare prices.
Movement Options Inside a Replica IW328087
Chinese Automatic (DG2813, A2824)
The DG2813 is a 21-jewel automatic that beats at 21,600 vibrations per hour. The A2824 is a clone of the ETA 2824 and beats at 28,800, which gives a smoother sweep on the seconds hand. Both are easy for a local watchmaker to regulate or replace.
Japanese Automatic (Miyota 9015)
Some builders drop a Miyota 9015 into the case. It beats at 28,800, holds time well, and costs more than the Chinese options. A Miyota inside a replica points to a builder who cares about reliability, not just looks.
Quartz
Quartz copies sit at the bottom of the market. They keep time, but the seconds hand ticks once per second, which is the fastest way to spot one on the wrist. Skip quartz if you want the watch to pass as the real thing.
Case, Crystal, and Dial: What to Check
Finishing is where cheap copies fall apart. Run your eye down this list before you pay.
- Bezel and case brushing should follow one direction. Crossed brush marks mean a rushed polish.
- Applied markers must sit level. A tilted marker is a reject.
- Lume should fill each marker evenly and glow within seconds of a charge.
- The date should sit centered in its window at midnight, not drift past it.
- End links should sit flush against the case with no gap you can see from arm's length.
- The crown should thread or click without grit, and the stem should not wobble.
How to QC a Replica IW328087 Before It Ships
- Ask for time-stamped photos, not catalog shots. A seller who refuses is hiding something.
- Request a macro of the dial with the hands at 10:10 and the date at 15.
- Ask for a wrist shot and a shot on a scale. Weight tells you whether the steel is solid.
- Get a photo of the movement with the caseback off.
- Confirm the return window in writing and pay through a channel that offers buyer protection.
- Test on arrival: wind it, set the date, then time it against a phone for 24 hours.
Most replicas run within 10 to 20 seconds a day out of the box. A watchmaker can regulate that to under 10 seconds for a small fee.
Questions Buyers Ask About the Replica IW328087
Is a replica IW328087 waterproof?
Treat it as splash resistant at best. Replica gaskets and casebacks are not tested to ISO 22810, so do not swim or shower with one. A watchmaker can pressure test the case and swap in better gaskets if you want to wear it near water.
How long does one last?
A DG2813 or A2824 copy tends to run for three to seven years before it needs a service or a swap. The movement is the cheap part, and a replacement costs less than a service on a Swiss caliber.
Can a jeweler tell it is a copy?
From across a table, no. Under a loupe, yes. Movement engraving, dial printing, and caseback text give it away to anyone who handles the real watch each week.
Should I have it serviced?
Not on day one. Wear it, track the rate for a month, and pay for regulation only if the drift bothers you. Cleaning and oiling a clone movement costs about as much as the movement itself.
What to Confirm With the Seller Before You Pay
Ask for the factory name, the movement model, the steel grade, and the crystal type in writing. A seller who answers with photos and part numbers is easier to hold to a return. Save the chat log until the watch clears your own QC.
One last note: buying a counterfeit watch is illegal in some countries, and customs can seize it. Check your local rules before you order.