What replica IW328034 means
IW328034 is an IWC reference number. The 3280 block covers more than one IWC model family, so the same six digits show up under different watch names in dealer listings. Ask the seller for the model name, the case size, and a photo of the case back. Confirm those three items against the IWC catalog page before you pay. If the seller cannot name the model, stop there.
Replica listings for this reference describe a three-hand automatic with a steel case. Treat that description as a starting point, not a spec sheet.
Specs to confirm
- Case diameter: 40 mm is the figure quoted in most listings for this block. Check the photo against a ruler.
- Lug width: 20 mm on most variants, 21 mm on a few.
- Crystal: sapphire, anti-reflective coating on one or both faces.
- Water resistance: 100 m claimed, 50 m realistic on most replicas.
- Dial: matte black, blue, or green, applied indices, printed minute track.
- Case back: exhibition or solid, based on the specific model.
Movement
Genuine IWC watches in this block use in-house calibres. Replicas do not. Three tiers exist:
- Budget: quartz or a low-grade Chinese automatic with a plain rotor.
- Mid: Miyota 9015 or Seagull ST2130, beat rate 28,800 vph, reserve near 40 hours.
- Top: modified ETA 2892 or a clone with engraved bridges and perlage.
A Miyota 9015 gets serviced by most watchmakers. A decorated clone needs a specialist. Ask which movement is inside before you order.
Price ranges
Budget replicas of this reference sell for $70 to $150. Mid tier runs $180 to $350. Top tier runs $400 to $700. Price tracks the movement, the bracelet, and the quality control. A $500 replica with a Miyota is overpriced.
QC checklist before you accept shipping
- Date wheel alignment at 1, 15, and 31.
- Case and bezel line gaps under a loupe.
- Dial print sharpness at 10x.
- Crown threads, three full turns minimum.
- Timegrapher reading: rate within plus or minus 10 s/day, beat error under 0.8 ms, amplitude above 250 degrees.
- Lume charge and glow.
- Bracelet or strap screws seated flush.
Red flags
- Stock photos with no timestamp.
- Claims of 1:1 quality with no timegrapher photo.
- No return window.
- Payment methods with no reversal path.
Care
Service interval for a replica automatic is 3 to 5 years. Keep the watch out of water unless the gaskets get tested. Wind it twice a month or store it on a winder. Sweat and sun fade plated finishes faster than steel.